Introduction
All doors need a gap between the perimeter of the door and the door frame to allow the door to function correctly. These gaps allow doors to be opened and closed easily and accommodate any expansion movement within the building. Consequently these gaps also allow sound, smoke, fire, heat (hot & cold) etc. to permeate through the door set assembly. RESSA acoustic and smoke corner seals provide the traditional seal for these gaps of timber and steel door edges and frames.
Characteristic
▪ Unique easy fit product
▪ Eliminates the need for a separate smoke seal
▪ Supplied with a high performance self adhesive backing
▪ Excellent compression and deflection performance
▪ Reduced door closing force due to a low co-efficient material
▪ used in integral fins
▪ Available in White, Grey, Black or Brown
▪ Minimum gap seal size 3mm/4mm
▪ Location: Head and jambs of single and double leaf doors
Installation Instructions
This product has been designed to provide an effective smoke seal in the gap around a fire-rated door.
Care should be taken to install this product without stretching or damaging it in any way.
1. Measure the frame at the top and both sides.
2. Cut the product to fit using a knife or scissors
3. Remove both pieces of protective backing one foot at a time.
4. The temperature of the frame should be above 10 centigrade.
5. The frame should be cleaned and remove dust oil grease or dirt.
6. Adhere seal to the exact location on frame where section is to be installed.
7. Do not remove and relocate.
8. Inspect seal to assure proper location
Reviews
There are no reviews yet.